White Line Painted Louvre Doors
28mm thick White Line louvre doors are sold individually. Scroll down to see more information on this product.
Height: 457mm (18") 610mm (24") 762mm (30") 915mm (36") 1067mm (42") 1220mm (48") 1372mm (54") 1524mm (60") 1676mm (66") 1829mm (72") 1981mm (78") 2200mm (86.6") Width: 305mm (12") 381mm (15") 533mm (21") 610mm (24")
Millimetres Inches Centimetres
Use the boxes above to enter a custom size
Colours and images should be used as
a guide only and may vary from the actual
product. Dimensions quoted may vary slightly
from actual dimensions.
Araucaria White Line pre-painted pine louvre doors
White Line painted louvre doors are made from exactly the same premium timber as our high quality Araucaria
High Line units (see product details on this range for further information).
The only difference is that they are painted in white to save you the laborious task of having to prepare and prime the wood yourself.
White Line interior louvre doors
As is customary with all primed finishes, the primed coat on the doors will need scuffing up with a fine sandpaper (to aid better adhesion) prior to applying your chosen topcoat.
Each door will be supplied to you individually shrink wrapped for protection and ready for you to paint.
White Line sizes and installation tips.
Louvre doors from Simply Shutters are available in a number of pre-painted height and widths. The slatted/vented louvres are 'open' to allow airflow.
Araucaria White Line pre-painted pine panel sizes
The doors have sufficient timber (top and bottom) to allow for some trimming. The amount that can be taken off of the overall height of a door depends on the door size as there is more capacity to trim on the taller doors than the shorter doors.
Trimming the overall width is a little trickier. Some easing of the verticals is allowable but we do not recommend taking more than a maximum of 7mm from each side of the vertical frame (stile) otherwise this could seriously weaken the door.
The horizontal frame sections (rails) are held to the stile by dowels. Should you cut through one these dowels when trimming, we suggest drilling a pilot hole and then inserting a 3" (75mm) screw through the stile into the rail to replace the lost dowel. The screw head should be countersunk into the timber and then backfilled with wood filler and sanded for an invisible finish.
Don't forget to allow approximately 3mm per gap to allow for hinges and the easy operation of the door to prevent fouling on the door frame after painting.
The following table can be used to convert some of our popular White Line interior louvered door sizes from millimetres to inches.
Louvered Door sizes (mm)
Louvered Door sizes (inches)
Following the initial placement of my order for white primed louvre doors on Saturday, I spoke with Paul Miller on Monday morning to see if he could assist with fast delivery as the doors needed hanging whilst my joiner was at home. Having chatted through the options available, I decided to have the natural finish doors and they arrived mid-morning
... Read More on Tuesday; Paul's help and guidance was invaluable.
I was absolutely delighted with both the product, as well as the most fantastically impressive customer service; what Paul said would happen did happen!
I'm not sure how many times in the future I may need to purchase louvre doors or shutters but should the need arise, I will certainly choose Simply Shutters.
Likewise, should I have the opportunity to recommend their services to others, I would have no hesitation in extolling their quite remarkable service.
... Read Less
Sevenoaks, Kent Click here for more reviews
There are no installation instructions for this product