Extrawide Exterior Shutters
Because we use pre-manufactured component parts to construct the shutters, it is the width of these component parts that dictate the width of the shutters that we can build. We can cut the stile or vertical side rail that makes the frame to any length in ¼ inch increments. Currently, the only way that we can assemble a shutter wider than 18” (450mm) is to use a vertical centre support rib or mullion that gives the finished shutter a bi-fold appearance.
Buy Extrawide Shutters online now!
Polypropylene vinyl, whilst almost impervious to weathering, does not posses the same tensile strength as wood and therefore cannot be extended beyond a certain width. To overcome this problem we install a support rib that then allows us to join smaller components together to achieve the wider widths required. This rib also braces the louvres to eliminate the potential for them to sag.
The Extrawide shutter is particularly useful if you need to cover up paint marks on brickwork that show where a previous shutter has been painted whilst on the wall. They also look very stylish.
Buy Extrawide Shutters online now!
Should you require a wider shutter that does not use a vertical support rib in the construction, please refer to our Town & Country range.
Width options available 15” / 19” / 21” / 24” / 25.5” / 27” / 29” & 31” (all sizes nominal)
We will build Extrawide Louvre and Panel shutters for you to length in ¼ inch increments
